BVJXV - LASER TYPE TONER CX/SX/LX/NX/4L/EX
- MSDS: BVJXV
- Manufacturer: LASER DOCTOR
- Product Name: LASER TYPE TONER CX/SX/LX/NX/4L/EX
- National Stock Number: 6850-00N050609
Product Identification
Product ID:LASER TYPE TONER CX/SX/LX/NX/4L/EX
MSDS Date:09/15/1993
FSC:6850
NIIN:00N050609
MSDS Number: BVJXV
Responsible Party
ESCONDIDO, CA 92029
US
Emergency Phone: 619-747-9600
Info Phone: 619-747-9600
Cage: 0U558
Contractor
Telephone: 619-747-9600
Cage: 0U558
Ingredients
NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MINIMAL RESP TRACT IRRIT MAY
OCCUR AS W/EXPOS TO LG AMTS OF ANY NON-TOX DUST. IN A CHRONIC INHAL
STUDY IN RATS USING A SPECIAL TEST TONER, THERE WERE NO LUNG
CHANGES @ ALL IN LOWEST EXPOS LEVEL (1 MG/M3), MOST RELEVANT LEVEL
TO POTNTL HUMAN EXPOS. A VERY SLIGHT DEGREE OF FIBROSIS WAS NOTED
IN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:25% OF ANIMALS @ MIDDLE EXPOS LEVEL (4
MG/M3) WHILE A SLIGHT DEGREE OF FIBROSIS WAS OBSERVED @ HIGHEST
EXPOS LEVEL (15 MG/M3) IN ALL ANIMALS. THESE FINDINGS ARE
ATTRIBUTED TO "LUNG OVERLOADIN G", A GENERIC RESPONSE TO EXCESSIVE
AMTS OF ANY DUST RETAINED IN LUNGS FOR A PRLNGD INTERVAL. SPECIAL
TONER (SUPDAT)
Medical Cond Aggravated by Exposure:NONE WHEN USED AS INTENDED IN
PRINTING EQUIPMENT FOR WHICH IT IS DESIGNED.
First Aid
First Aid:INHAL: REMOVE FROM EXPOS. SKIN: WASH WITH SOAP AND WATER.
INGEST: DILUTE STOMACH CONTENTS WITH SEVERAL GLASSES OF WATER. EYE:
IMMED FLUSH WITH POTABLE WATER FOR A MINIMUM OF 15 MIN, SEEK
ASSISTANCE FR OM MD .
Fire Fighting
Flash Point Method:TCC
Extinguishing Media:FOAM, DRY CHEMICAL, CO*2, WATER SPRAY/MIST.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . AVOID INHALATION OF SMOKE.
Unusual Fire/Explosion Hazard:MATERIAL IS COMBUSTIBLE. WHEN DISPERSED
IN AIR IT CAN FORM EXPLOSIVE MIXTURES.
Accidental Release
Spill Release Procedures:LOOSE TONER CAN BE REMOVED USING A VACUUM
CLEANER. MAY BE SWEPT UP(AVOID DUST INHAL-USE APPROP NIOSH/MSHA
APPRVD DUST MASK IF NECESSARY).
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
AREA. AVOID PROLONGED INHALATION OF EXCESSIVE DUST.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKS GOGGS .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP: WAS 10 X MORE RESPIRABLE THAN COMMERCIALLY AVAIL TONER
TO COMPLY W/EPA TESTING PROTOCOL.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:>212F,>100C
Spec Gravity:1.5-1.7(H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE BLACK POWDER, MILD RESINOUS ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:PRODUCTS OF COMBUSTION CAN BE TOXIC
DEPENDING ON CONDITIONS. AVOID BREATHING SMOKE.
Disposal
Waste Disposal Methods:DO NOT INCINERATE. INSURE CONFORMITY WITH
FEDERAL, STATE, AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.